|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Storage Maintenance for Mass Termination Assembly (MTA)- 100 and - 156 Connector Strain Relief Covers Made with Polyamide 408-- 10313 31 JUL 09 Rev A Instruction Sheet PRODUCT IS MOISTURIZED DO NOT OPEN BAG UNTIL TIME OF USE RESEAL BAG IMMEDIATELY AFTER EACH USE PRODUCT WEIGHT AMOUNT OF DI WATER TO ADD Pound (lb) (See Note) Cubic Centimeters (cc) 011 023 034 045 056 068 080 091 103 114 125 136 148 159 170 181 193 204 215 226 238 250 261 273 284 295 306 318 329 340 351 363 Pound (lb) .025 .050 .075 .100 .125 .150 .175 .200 .225 .250 .275 .300 .325 .350 .375 .400 .425 .450 .475 .500 .525 .550 .575 .600 .625 .650 .675 .700 .725 .750 .775 .800 01 02 03 04 05 To Avoid Hydration of Product, Bag Must Have A Targeted Moistured Content Between 2 and 3% of Weight 1. INTRODUCTION Proper storage of product must be maintained according to the instructions given by the distributor or supplier. Proper hydration of product must be maintained according to these instructions. 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 2. DESCRIPTION Product is contained in a polyethylene bag. For product to be functional, make sure that the following applies: -- the bag must have a target moisture content between 2 and 3% of weight -- the bag must be completely sealed If a bag containing product has a moisture content of less than 2% of weight, the bag must be re--hydrated with deionized (DI) water (or distilled water) before returning product to storage. 3. RE- HYDRATING INSTRUCTION 1. Using a scale, weigh the product in the bag. 2. Refer to the table on this page to determine the amount of DI water to add to the bag. 3. Spray the DI water into the bag until the targeted weight is achieved. 4. REVISION SUMMARY S Initial release of instruction sheet Note: Round product weight to nearest whole pound. TOOLING ASSISTANCE CENTER 1-- 800-- 722-- 1111 E2009 Tyco Electronics Corporation, Harrisburg, PA PRODUCT INFORMATION 1-- 800-- 522-- 6752 All International Rights Reserved TE logo and Tyco Electronics are trademarks. *Trademark. Other products, logos, and company names used are the property of their respective owners. This controlled document is subject to change. For latest revision and Regional Customer Service, visit our website at www.tycoelectronics.com 1 of 1 LOC B |
Price & Availability of 1-643067-0 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |